| Gewicht |
28.1 kg |
| Afmetingen |
507 × 438 × 330 mm |
| Merk |
Mark Levinson
|
| ANALOG LINE STAGE |
– Line Input Impedance: Balanced (XLR): 20kΩ; Single-ended (RCA): 10kΩ
– Volume Control: Balanced; voltage mode; digitally-controlled resistor network
– Gain: 8.5dB maximum
– Output Impedance: 55Ω
– Output Overload: >4.5V RMS
– Frequency Response: 20Hz to 20kHz, ±0.03dB; <2Hz to 210kHz, +0.1/–3dB (At unity gain volume setting)
– Total Harmonic Distortion: <0.01%,1kHz; <0.03%,20 kHz; 2V RMS output (At unity gain volume setting)
– Signal-To-Noise Ratio: >96dB (20Hz to 20kHz, A-weighted); >93dB (20Hz to 20kHz, wideband, unweighted)
(Referred to 2V RMS output, unity gain volume setting)
– Input Sensitivity: 53mV RMS at line input for 2.83V RMS at speaker output, maximum volume setting
– System Gain: 34.5dB, line input to speaker output, maximum volume setting
|
| PHONO STAGE |
– Riaa Frequency Response: 20Hz to 20kHz, ±0.3dB
– Infrasonic Filter: Selectable; 20Hz, 1st order (6dB/octave)
|
| MOVING-MAGNET MODE |
– Input Resistance: 47kΩ
– Input Capacitance: Selectable; 20, 70, 120, 170pF
– Gain: 39dB at 1kHz
– Total Harmonic Distortion: <0.01%, 1kHz, 2V RMS output; <0.05%, 20kHz, 2V RMS output
– Signal-To-Noise Ratio: >90dB (20Hz to 20kHz A-weighted, referred to 2V RMS output);
>78dB (20Hz to 20kHz, wideband, unweighted, referred to 2V RMS output)
– Maximum Input Level: >190mV at 1kHz; >1.6V at 20kHz
|
| MOVING-COIL MODE |
– Input Resistance: Selectable, 37Ω to 1000Ω
– Gain: 69dB at 1kHz
– Total Harmonic Distortion: <0.01%, 1kHz, 2V RMS output; <0.06%, 20kHz, 2V RMS output
– Signal-To-Noise Ratio: >71dB (20Hz to 20kHz A-weighted, referred to 2V RMS output);
>66dB (20Hz to 20kHz, wideband, unweighted, referred to 2V RMS output)
– Maximum Input Level: >6.5mV at 1kHz; >19mV at 20kHz
|
| DIGITAL-TO-ANALOG CONVERTER STAGE |
– Output Voltage: 5.7V RMS at maximum volume/full scale (0dBFS)
– Frequency Response: 20Hz to 20kHz, +0/–0.02dB (192kHz/24 bit signal);
20Hz to 20kHz, +0/–0.05dB (44.1kHz/16 bit signal)
– Total Harmonic Distortion: <0.0025%, 20Hz to 20kHz,at 3V RMS output (192kHz/24 bit signal);
<0.003%, 20Hz to 20kHz, at 3V RMS output (44.1kHz/16 bit signal);
<0.006%, 90kHz, at 3V RMS output (192kHz/24 bit signal)
– Signal-To-Noise Ratio: >100dB (20Hz to 20 kHz, 192kHz/24 bit signal, A-weighted);
>98dB (20Hz to 20 kHz, 192kHz/24 bit signal, wideband, unweighted;
>94dB (20Hz to 20 kHz, 44.1kHz/16 bit signal, A-weighted);
>92dB (20Hz to 20 kHz, 44.1kHz/16 bit signal, wideband, unweighted) ( referred to 2V RMS output)
– Sample Rates/Bit Depth: PCM: 32, 44.1, 48, 88.2, 96, 176.4, 192, 352.8, or 384kHz; up to 32 bits; DSD: Native or DoP; single, double, or quad speed (2.8, 5.6, or 11.2MHz)
– Digital Processing: Full MQA decoding; PCM: Seven user-selectable digital filter settings;
user-selectable up-sampling to 352.8/384kHz; DSD: Four user-selectable digital filter settings
|
| HEADPHONE OUTPUT |
– Total Harmonic Distortion: <0.04%, 20Hz and 1kHz, 2V RMS output, 30Ω load; <0.10%, 20kHz, 2V RMS output, 30Ω load
– Output Overload: >3.3V RMS, 30Ω load
– Signal-To-Noise Ratio: >91dB (20Hz to 20kHz, A-weighted, referred to 2V RMS output);
>87dB (20Hz to 20kHz, wideband, unweighted, referred to 2V RMS output
– Output Impedance: <2.5Ω, 20Hz to 20kHz
|
| AMPLIFIER SECTION |
– Frequency Response: <2Hz to 20kHz, +0/–0.2 dB; <2Hz to 100kHz, +0/–3dB
– Signal-To-Noise Ratio: >103dB (20Hz to 20 kHz, A-weighted); >100dB (20Hz to 20 kHz, wideband, unweighted)
– Total Harmonic Distortion + Noise: <0.035% at 1kHz, 125W, 8Ω; <0.18% at 20kHz, 125W, 8Ω
– Output Power: 125W RMS per channel at 8Ω, 20Hz to 20kHz
– Output Impedance: <0.098Ω, 20Hz to 10kHz; <0.11Ω at 20kHz
– Damping Factor: >82, 20Hz to 10kHz; >72 at 20kHz (All referred to 8Ω)
|
| GENERAL |
– Analog Input Connectors: 1 pair balanced line-level inputs (XLR); 2 pairs single-ended line-level inputs (RCA); 1 pair single-ended moving-coil phono inputs (RCA); 1 pair single-ended moving-magnet phono inputs (RCA)
– Digital Audio Connectors: 2 optical digital inputs (Toslink); 1 asynchronous USB digital input (USB-B); №5805: 1 coaxial digital S/PDIF input (RCA); №5802: 2 coaxial digital S/PDIF input (RCA); №5802: 1 balanced digital AES/EBU input (XLR)
– Output Connectors: 1 pair single-ended line-level outputs (RCA); 2 pairs loudspeaker outputs (High-current binding posts with banana sockets; accept spade lugs with ¼”/6.3mm spacing up to ⅛”/3mm thick)
– Control Connectors: 1 RS-232 port (DB9 connector); 1 IR input (⅛”/3.5mm phone jack); 1 programmable 12V DC trigger output (⅛”/3.5mm phone jack), 100mA maximum; 1 programmable 12V DC trigger input (⅛”/3.5mm phone jack); 1 Ethernet port (RJ-45 connector)
– Mains Voltage: 100VAC, 115VAC, or 230VAC, factory set
– Power Consumption: Standby, “Green” mode: <0.4W
Standby, “Power Save” mode: 7W
Standby, “Normal” mode: 70W;
Power on, quiescent: 120W;
Power on, both channels at ⅛ rated power: 240W;
– Dimensions/Weight (Unit): Height: 5.72”/145mm; Height without feet: 5.25”/133mm; Width: 17.25”/438mm; Depth: 19.98”/507mm; Weight: 62 lbs/28.1kg
– Dimensions/Weight (With Packaging): Height: 13.0”/330mm; Width: 24.0”/610mm; Depth: 28.0”/711mm; Weight: 73 lbs/33.0kg;
|
Levering binnen 2 werkdagen
